FDRsafety: Workplace Safety Consulting and Training

Training

Courses for On-site Training

FDRsafety offers unique on-site safety training services that include consulting, seminars and workshops. They are built on an unparalleled base of knowledge, experience and global resources.

FDRsafety provides a flexible approach to safety systems that will support your existing staff and enhance your own capabilities.

During an on-site seminar, FDRsafety will educate your workforce on Safety Awareness, conveying principles that alter behavior through a "want to" vs. "have to" process. This is accomplished through constant interaction and positive reinforcement in the training sessions.

Our on-site seminars encourage every employee in your company to place safety on the same level as quality, production and cost goals.

FDRsafety realizes that success can only be achieved when all of your employees learn to value safety for themselves, their family and their fellow workers.

The following links provide a more thorough description of each On-site Training Course:

Safety Awareness ~ 8 Hours
Safety Management ~ 40 Hours
Supervisor Safety Training ~ 24 Hours
OSHA 10 Hour Course
OSHA 30 Hour Course
Airline Safety Awareness Course ~ 8 Hours
Hazardous Materials/Dangerous Goods Course ~ 16 or 24 Hours
Customized Compliance Courses

Safety Awareness - 8 Hours
The Safety Awareness seminars are tailored to your industry, your company and your company’s safety goals. The sessions are designed to increase the employee’s awareness of the importance of safety. These seminars combine motivation with specific safety topics. Methods include discussion of key safety concepts, videos and team building. Specific topics customized to your business often include lockout/tagout, hazard communication, fall protection, permit-required confined spaces and personal protective equipment.
back to top

Safety Management - 40 Hours
This course includes extensive training for supervisors and safety staff. It contains an overview of safety concepts and the nature, causes and results of accidents. The management topics incorporated into the seminar include safety meetings, safety committees, workers compensation, toolbox talks and using the OSHA Standards effectively. Specific topics customized to your business often include lockout/tagout, hazard communication, fall protection, permit-required confined spaces and personal protective equipment. Each participant receives the OSHA 10 Hour Training certification.
back to top

Supervisor Safety Training - 24 Hours
This seminar assists supervisors in evaluating employee safety habits and educating proper safety procedures. The course includes video introduction to safety, instruction on conducting observations, safety meetings and hazard communications. The instructor led discussions are on specific safety procedures, safety management and customized topics. The topics that FDRsafety can customize into the course include safety meetings, safety committees, workers compensation, toolbox talks, using the OSHA Standards effectively and other industry-specific issues.
back to top

OSHA 10 Hour Course
FDRsafety can deliver this course for General Industry or Construction and each seminar is taught by an authorized OSHA instructor. The course provides detailed information on complying with safety and health standards, an introduction to the OSH Act and detailed discussion and instructions on the OSHA regulations most relevant to your employees. Participants will be able to resolve safety concerns recognize workplace processes, materials and equipment, specify OSHA standards and identify common workplace hazards and recommended abatement methods.

Each Participant will receive a certification cards from OSHA after completing this course.
Who should attend: Safety Managers/ Safety Coordinators; HR Professionals in charge of safety; Supervisors/managers
Program Content (varies for Construction and General Industry) includes:
- Introduction to OSHA, the OSHA Act and the General Duty Clause
- Materials handling, storage and use of disposal
- Introduction to OSHA inspections, citations and penalties
- Hazard Communication
- Hazardous Materials
- Walking and Working surfaces
- Means of Egress and Fire Protection
- Machine Guarding
- Electrical Safety
- Recordkeeping
- Forklift safety
- Fall protection
- Lockout/Tagout
- Personal Protective Equipment
- Fire Protection
- Scaffolds and Ladders
- Cranes, Hoist, Derricks, Elevators and Conveyors
- Motor Vehicles, Mechanized Equipment and Construction Equipment
- Excavation Safety

OSHA 30 Hour Course
“The Guide to Voluntary Compliance”- 30-hour Industry Safety and Health Outreach Training Programs are intended for all entry level employees and employees that have responsibility for health and safety compliance. Each course is taught by one of FDRsafety’s authorized OSHA instructors. The course can be customized for your company and incorporates OSHA’s approved curriculum of either Construction Industry or General Industry Standards

In addition to covering the same topics as the 10-Hour program, this course covers supplemental safety/OSHA material. Participants will be able to interpret safety/health policy and procedures as related to OSHA regulations. The classroom instruction will be combined with competency-based workshops that enable participants to demonstrate proficiency with the acquired skills.
All attendees will receive 30 Hour OSHA Course Completion Cards from OSHA after successful completion of the programs.
Who Should Attend: Safety coordinators/safety managers; HR Professionals in charge of safety; Supervisors/ Managers
Program Content (varies for Construction and General Industry) includes:
- Introduction to OSHA, the OSH Act, and the General Duty Clause
- Materials handling, storage and use and disposal
- Introduction to OSHA Inspections, Citations and Penalties
- Hazard Communication
- Hazardous Materials
- Working and Working Surfaces
- Means of Egress and Fire Protection
- Machine Guarding
- Electrical Safety
- Recordkeeping
- Forklift Safety
- Fall Protection
- Lockout/Tagout
- Personal Protective Equipment
- Fire Protection
- Scaffolds and Ladders
- Cranes, Hoist, Derricks, Elevators and Conveyors
- Welding and Cutting Operations
- Rollover Protective Structures and Overhead Protection
- Concrete and Masonry Construction
- Confined Space Entry
- Steel Erection
- Underground Construction, Caissons, Cofferdams and Compressed Air Demolitions
- Blasting and Use of Explosives
- Power Transmission and Distribution
- Process Safety Management
- Lead Hazards in Construction
- Power Platforms, Man-lifts and Vehicle-Mounted Work Platforms
- Hearing Conservation
- Ergonomics
- General Environmental Controls
- Medical and First Aid
- Safety and Health Program Management
- Hand and Portable Power Tools
- Bloodborne Pathogens

Airline Safety Awareness Course - 8 Hours
This course focuses on ramp safety, hazardous materials, baggage handling, and aircraft and facilities maintenance. FDRsafety will customize the contents to meet your specific safety goals.
back to top

Hazardous Materials/Dangerous Goods Course - 16 or 24 Hours
FDRsafety has developed this course to assist employers with compliance with Title 49 CFR/IATA. It is an FAA/DOT certified course that ensures maintained compliance with all HAZMAT laws and regulations. The seminar covers handling, labeling, transportation, storage of hazardous materials and hazard communications.
back to top

Customized Compliance Courses
FDRsafety will develop a custom course on any safety, health or environmental topic that your company needs. FDRsafety’s team of consultants will work with you to determine your goals, the length of the course, and the appropriate content. This process is a team approach that utilizes the strengths of the client, the FDRsafety subject matter experts, our instructional designers, graphic designers, writers and editors to develop high-quality courses.
back to top